Ideal for commercial, industrial
facilities where economy,
appearance and the ultimate
ease of installation and
maintenance are
desired.
Also solid-state electronics to
offer both reliability and low
cost performance.
Cat. No.:
4LR
Dimension:
See Dimension Image
Download
Features
Recessed Can : Non-IC Remodel Housing
- 4-Inch Low Voltage Remodel Housing
- 50 watts, 120 volts
- Dimensions: 5.75in high x 4-7/8in wide x 14.5in long
- Ceiling Cutout: 4.25in in diameter
- Mounting : four remodeling spring clips secure housing in place and accommodate
various ceiling thicknesses
- Lamps: uses an MR16 12-volt Halogen Lamp
- Wattage of Lamps: 20 watts, 35 watts, or 50 watts (max.)
- Transformer: integral magnetic Class H thermally protected 12-volt transformer preinstalled
into J-box
- Separate Transformer Support: this remodel housing, like all good remodel housings,
has a separate support mechanism for the transformer, so that the weight of the
transformer does not put undue stress on the housing clips that hold the housing flush
to the sheetrock
- Ceiling Insulation: ceiling insulation must be kept at least 3 inches away from all outside
surfaces of the housing
- Junction Box: J-box is UL listed for through branch circuit wiring
- Knockouts: junction box has four 1/2in knockouts, two 3/4in knockouts, and four
Romex knockouts with true pry-out slots
- UL Listed for Damp Location: this housing is UL listed for damp locations
- Trims: to view the various trims that can be used with this housing just click on
4-Inch Low Voltage Trims for Sloped Ceilings.
- Dimmable: fully dimmable when using a dimmer designed for a magnetic low voltage
transformer.
